吳江天吳特種安全閥有限公司致力于低壓儲罐及管道的保護研究，專業生產美標API 2000系列呼吸閥、阻火器、氣體調節閥（氮封閥）、緊急泄放閥、人孔等儲罐保護產品。同時開發了可用于火電廠空冷系統及汽輪機蒸汽凝汽器的水封式大汽泄放閥；用于真空吸入的負壓安全閥；用于水處理系統的真空破壞閥等。也可根據用戶的需要生產各類低壓及真空泄放閥產品。

    真空破壞閥主要用于水處理系統，安裝于管道或容器的最高點。當停泵或快速排水時，管道內將產生真空，此時閥外大氣壓力高于管道內壓力，空氣進入管道內部，以防止管道被壓癟。而當開泵時，管道內部的空氣將通過微量排氣閥排出管道，從而防止水錘的產生，保護管道及水泵的安全。

The vacuum breaker is designed to prevent vacuum conditions from occurring in pipes or tanks. After a power failure or rapid draining of the system, a vacuum condition often occurs in a pipe or tank.The pressure difference between the inside vacuum and outside air will cause a downward force on the disc. At vacuum pressures greater than -0.25 psig, the disc will compress the spring and move downward allowing free flow of outside air into the pipe or tank to eliminate the vacuum. When positive pressure is restored in the pipe or tank, the valve will automatically close and seal tightly. Optional valves can be piped to the vacuum breaker to vent trapped air in the pipeline if needed.

型號 Model

VB41 真空破壞閥 Vacuum Breaker Valve

VB42 帶排氣閥真空破壞閥 Vacuum Breaker with Air Release Valve

設計特點 Design Features

u  口徑 2″~42″(DN50~DN1050); 

u  法蘭標準按可選用 ANSI B16.5 、HG/T 20592~20615、GB/T 9113等標準，

u  選用材料:鑄鐵、碳鋼、不銹鋼、其它特殊材料：

Design Features

u  Sizes available 2″~42″(DN50~DN1050);  

u  The flanges are accordance with ANSI B16.5,HG/T20592、GB/T9113、JIS;

u  Available Materials：Cast Iron、Carbon Steel、Stainless Steel、Special Materials on Application；